3M 2273MiD Cable/pipe/ Fault and Marker Locator

We are the distributors/suppliers of 3M 2273MiD Cable/pipe/ Fault and Marker Locator and supply 3M 2273MiD Cable/pipe/ Fault and Marker Locator to various telecom companies in India.

Designed to be more accurate, faster and more integrated than any other locator on the market, the 3M Dynatel 2273M-iD Cable/Pipe/Fault and Marker Locators can perform these additional functions: Pin-point the location and estimate the depth of all existing models of properly installed underground passive EMS markers Direct depth reading of ID markers Locate two different marker frequencies simultaneously Trace a cable path while simultaneously finding buried markers along the way.

cablefaultlocator.jpg

New-to-the-world technology for locating underground utilities without any doubt. The 3M Dynatel 2273M and 2273M-iD Cable/Pipe and Fault Locators are microprocessor-based systems that incorporate advanced digital signal processing techniques to quickly and efficiently locate conductor or sheath (earth return) faults and trace the path of underground cables and pipes, both copper and fiber optic (with metallic tracer wire). They provide accurate cable or Sonde depth measurements, giving a digital readout in inches, feet and inches, or centimeters (user-selectable). Lightweight, compact and well balanced, these cable/pipe and fault locators allow you to accurately and easily:
* Locate cable and pipe path
* Measure cable or Sonde depth with the push of a button
* Measure signal current in the cable
* Pin-point conductor or sheath (earth return) faults and cable breaks
* Discriminate between light and heavy faults
* Identify cable and cable pairs
* Tone shorts and grounds in aerial cable
* Identify cable pairs through wet sections
* Locate energized power cable

cablefaultlocator2.jpg

Advanced features detect more information about underground utilities. A new feature exclusive to the 3M Dynatel 2273M-iD Cable/Pipe/Fault and Marker Locator is the ability to write, read and lock programmed information into the new 3M 1400 Series EMS iD Ball Markers. Information such as a pre-programmed unique identification number, facility data, owner information, application type, placement date and other details from up to 100 ID markers can all be read, stored with date/time stamp and transmitted back to your PC through a standard RS232 serial port for enhanced resource management.

Designed to be more accurate, faster and more integrated than any other locator on the market, the 3M Dynatel 2273M-iD Cable/Pipe/Fault and Marker Locators can perform these additional functions:
* Pin-point the location and estimate the depth of all existing models of properly installed underground passive EMS markers
* Direct depth reading of ID markers
* Locate two different marker frequencies simultaneously
*Trace a cable path while simultaneously finding buried markers along the way

cablefaultlocator4.jpg

Several unique modes of operation for accurate locates in every situation. For cable path locating, the 3M Dynatel Cable/Pipe and Fault Locators have a highly accurate multi-antenna design for various user-selected locating modes Directional Peak, Multi-Directional Null, plus an ultra-sensitive Special Peak mode for extreme depths.
The receiver includes a unique “expander” function that makes peaks and nulls more pronounced. The expander feature enhances the response for fast tracking and pin-pointing of position. The unique Directional Peak mode combines the response from four peak antennas to indicate left/center/right direction to the cable/pipe while the bar graph and numeric display indicate the sharp and accurate dual-peak response. Automatic gain set with manual override provides maximum flexibility and control. The multi-directional null mode shows null signal response with automatic gain and utilizes the multiple antenna design to show cable/pipe location and direction on a unique compass like graphic user interface on the high-resolution display.

cablefaultlocator3.jpg

Precise location of sheath (earth return) faults. The 3M Dynatel 2273M and 2273M-iD Cable/Pipe and Fault Locators can precisely locate conductor or sheath (earth return) faults on both short and long cable sections faster than ever before. The transmitter unit sends a trace signal simultaneously with a fault-locate signal, allowing the operator to use the cable-locate function when locating faults in long cable sections. Fault strength is indicated on the receiver liquid crystal display (LCD) screen, allowing minor faults to be ignored, if desired. Up to three fault readings may be stored for quick reference.

A simple, easy-to-use system. Lightweight and easy to operate, the 3M Dynatel Cable/Pipe and Fault Locators are rugged, ergonomic and require very little operator training. A large backlit digital LCD screen and soft-key operation make them easy to understand for more precise locates. A memory feature remembers operator set-up from previous use. An RS232 communications port allows interfacing to an external computer for uploading/downloading of data, unit configuration and remote software upgrades. The system can run over 30 hours on eight AA alkaline batteries. The system consists of three basic components:
* Transmitter with built-in ohmmeter, which also senses and measures the presence of foreign voltage and tests the continuity of the circuit
* Rugged, one-piece hand-held receiver with bar graph signal strength and direction, that indicates received signal and proximity to the cable; ID versions locate all 3M EMS Markers and read/write to all 3M EMS-iD Markers
* Lightweight earth contact frame that is color-coded to correspond with indications from the receiver directing the operator toward the fault

The 3M Dynatel Cable/Pipe and Fault Locators use four active trace frequencies 577Hz, 8kHz, 33kHz and 200kHz which can be used individually or simultaneously to compensate for varying field conditions. The receiver incorporates passive power and auxiliary frequencies that do not require the use of the transmitter. The receiver also has the unique capability to accommodate four user-definable auxiliary frequencies and allows the user to perform a self-calibration operation at any frequency at any time. In total, the receiver accommodates 23 frequencies. With the easy-to-use configuration tool, users can enable or disable any frequency to select only the frequencies that they need to use. Both the receiver and the transmitter feature a self-test routine that is executed each time the unit is turned on. A power-up battery test indicates the battery level. Both components are constructed of heavy-duty materials designed to withstand typical field use.

Standard Dynatel accessories:
* 8006 Ground Rod; stainless steel
* 3019 Dyna-Coupler Kit; consists of 3 in. Dyna-Coupler, Coupler Cable and Pouch
* 2876 Direct-Connect Transmitter Cable; 10 ft. (3 m) in length; for Utility (U) models
* 9012 Direct-Connect Transmitter Cable; 5 ft. (1.5 m) in length; for Communications (C) models
* 3014 Earth Contact Frame
* 9026 Earth Contact Frame Cable; 4 ft. (1.2 m) in length

Optional Dynatel accessories:
* 2892 Small Clip Direct-Connect Transmitter Cable; 10 ft. (3 m) in length
* 9043 Ground Extension Cable
* 3001 3 in. Dyna-Coupler; for use on cables up to 3 in. (7.6 cm) in diameter
* 1196 6 in. Dyna-Coupler; for use on cables up to 6.9 in. (17.5 cm) in diameter; with pouch
* 9011 12 ft. Coupler Cable
* 3011 3/8 in. Inductive Probe; for pair identification
* 3013 Direct Probe
* 9023 Probe Cable
* 2200M Carrying Case/Bag
PHYSICAL SPECIFICATIONS SIZE
(H X W X D) IN. (CM) WEIGHT
(INCLUDING BATTERIES)
Transmitter 6.75 x 11.25 x 7.75 (17.2 x 28.6 x 19.7) 5.2 lb. (2.4 kg)
Receiver 10.25 x 10.5 x 30 (26.7 x 26.1 x 76.2) 2273M – 4.05 lb. (1.9 kg),
2273M-iD 4.85 lb. (2.3 kg)
Shipping NA 2273M 27 lb. (12.5 kg),
2273M-iD 28 lb. (12.9 kg)

Environmental Spcifications
Operating Temperature -4° F to 122° F (-20° C to 50° C) Storage temperature
Storage Temperature -4° F to 158° F (-20° C to 70° C)

Electrical Specifications
Receiver Frequencies Trace and tone modes Active: 577Hz, 8kHz, 33kHz, and 200kHz Passive power: 50L, 50H, 100, 60L, 60H, 120 Passive (other): CATV 31.5kHz Auxiliary: 560, 512, 460, 400, 393, 340, 333, 273Hz User defined: up to four frequencies (50~999Hz)
Performance Sensitivity @ 1 m/3.3 ft. from cable, Single Peak mode under low noise conditions
Depth
Display resolution 0.1 dB
Depth display range 0 to 30 ft. (9 m)
Depth units cm, inch, ft.-in.
Depth accuracy +/- 2% +/- 2 in. (5 cm) 0 to 60 in. (1.5 m) +/- 6% +/- 2 in. (5 cm) 60 to 120 in. (1.5 to 3 m) +/- 10% +/- 2 in. (5 cm) 120 to 180 in. (3 to 4.5 m)
Cable current display 0.1 dB resolution or 0.01 mA resolution Units: dB or mA
Power Battery type: Eight AA size, alkaline
Typical battery life 30 hours
Transmitter
Output frequencies Trace mode
Sheath (earth return) fault mode
Tone mode
Induction mode 577Hz, 8kHz, 33kHz, 200kHz
10/20 Hz for sheath (earth return) fault; 577Hz and 33kHz for tracing
577Hz and 200kHz pulsed at 8Hz
33kHz, 200kHz
Output Voltage (maximum)
Sheath (earth return) fault
Trace
Tone
70 Vrms
70 Vrms
Normal setting: 10 Vrms, High setting: 60 Vrms
Output Power Normal setting: Limited to 0.5W
High setting: Limited to 3W, or 5W with extension
DC power (option A only)
Output protection 240 Vrms Power
Battery type: Six C size, alkaline (LR14) cells;
External DC: 9-18V DC (1A) (option A only)
Typical battery life Normal output level: 50 hours
High output level: 10 hours

Distributors/suppliers/exporters of 3M 2273MiD Cable/pipe/ Fault and Marker Locator in India for various telecom companies. To buy 3M 2273MiD Cable/pipe/ Fault and Marker Locator in India please get in touch with us.